Sol Living
Westwood 36” x 14” Rectangle Tempered Glass Fire Pit Wind Screen – Stainless Steel Clips | Clear Polished Edge
Westwood 36” x 14” Rectangle Tempered Glass Fire Pit Wind Screen – Stainless Steel Clips | Clear Polished Edge
Quality Luxury Patio Products Made in America
Couldn't load pickup availability
The Westwood 36-Inch × 14-Inch Rectangle Tempered Glass Fire Pit Wind Screen is a clear, heat-resistant tempered glass panel designed to shield the flame zone of a rectangular fire pit table from wind while maintaining a fully unobstructed view of the fire. At 36 inches wide, 14 inches deep, and 7.7 inches tall, it fits the interior of most standard rectangular propane fire pit tables. The panel is constructed from polished-edge tempered glass that reflects firelight for an enhanced visual effect around the flame. Stainless steel attachment clips are included for installation. Water-resistant surface resists soot and residue buildup. Backed by a 1-year limited manufacturer warranty.
Why Customers Choose This Wind Screen
- Clear tempered glass maintains a full, unobstructed view of the flame — unlike solid metal wind screens that block the fire visually from some angles
- Polished glass edges reflect firelight around the flame zone, enhancing the visual ambiance of the fire pit beyond simple wind protection
- 7.7-inch panel height provides meaningful wind shielding for a propane fire pit flame without blocking sightlines across the table
- Stainless steel attachment clips included — installs quickly on most rectangular fire pit table ledges without tools
- Heat-resistant tempered glass is purpose-built for proximity to open flame — safer than standard glass or acrylic alternatives
- Soot-resistant surface reduces residue accumulation from the flame and makes cleaning straightforward
- 36-inch width fits the interior of most standard rectangular fire pit tables in this size range
- 1-year limited manufacturer warranty
Product Highlights
Tempered Glass – Heat-Resistant and Safer Than Standard Glass
Tempered glass is produced by heating standard glass to approximately 620°C and then rapidly cooling it — a process that places the outer surfaces under compression and the interior under tension. This creates a glass that is four to five times stronger than standard annealed glass and, critically, fractures differently: when tempered glass breaks, it shatters into small, relatively blunt granular pieces rather than large sharp shards. For a fire pit wind screen that sits in proximity to an open flame and is subject to thermal stress, tempered glass is the appropriate material specification. Standard glass or acrylic alternatives are not suitable for this application.
Clear Glass – Unobstructed Flame View
Unlike metal mesh screens or solid panel alternatives, clear glass provides wind protection without blocking the visual experience of the fire. From every seat around the fire pit table, the flame remains fully visible through the glass panel. This is a meaningful distinction for a fire pit where the flame is the visual and social centerpiece of the seating arrangement — a wind screen that blocks the flame view defeats part of the purpose of the fire pit.
Polished Edges and Firelight Reflection
The glass panel has polished edges rather than cut or raw edges. Polished edges reduce the risk of chips and micro-cracks at the glass perimeter that can initiate thermal stress fractures under heat cycling, and eliminate the sharp-edge handling risk of unfinished cut glass. The clear glass surface also reflects firelight from the flame, creating a secondary visual effect — the glass itself becomes part of the fire pit’s ambient lighting as it catches and refracts the flame. This enhances the overall visual atmosphere of the fire pit beyond simple wind protection.
Stainless Steel Attachment Clips
The wind screen includes stainless steel attachment clips that secure the glass panel to the ledge or rim of most rectangular fire pit tables. Stainless steel is the appropriate clip material for this application — it resists rust and corrosion from moisture and heat exposure, which is important for clips that will be permanently installed on an outdoor fire feature. Install the clips per the included instructions and confirm the glass panel is fully seated and stable before operating the fire pit.
Sizing – Fits Most Rectangular Fire Pit Tables
The wind screen is 36 inches wide, 14 inches deep, and 7.7 inches tall. It is designed to fit within the interior ledge of most standard rectangular propane fire pit tables in the 36-42 inch size range. Measure your fire pit table’s interior ledge width and depth before ordering — the wind screen should sit within the ledge without overhanging the burner area. The 7.7-inch panel height provides sufficient flame shielding for most propane fire pit burner heights without interfering with the fire pit lid or glass beads above the burner.
Soot-Resistant Surface – Low Maintenance
The glass surface is resistant to soot and residue accumulation from the propane flame. Wipe the interior surface with a damp cloth after use to remove any light film. For heavier residue, a glass cleaner appropriate for tempered glass is suitable. Do not use abrasive cleaners or scourers on the polished surface, as these can cause micro-scratches that reduce clarity over time.
Specifications
| Brand | Sol Living (Westwood Series) |
| Accessory Type | Fire Pit Table Wind Screen |
| Shape | Rectangle |
| Material | Tempered Glass (heat-resistant) |
| Color / Finish | Clear (polished edges) |
| Attachment Hardware | Stainless Steel Clips (included) |
| Width | 36 in. |
| Depth | 14 in. |
| Height | 7.7 in. |
| Water Resistance | Yes |
| Soot Resistance | Yes |
| Compatible Fire Pit Type | Rectangular Propane Fire Pit Tables |
| Return Policy | 90-Day Return |
| Warranty | 1-Year Limited Manufacturer Warranty |
Ideal For
- Rectangular propane fire pit tables where wind causes flame instability, low output, or frequent extinguishing
- Fire pit owners who want wind protection without blocking the flame view that metal mesh or solid screens create
- Patios and decks in wind-exposed locations where consistent flame performance is difficult to maintain without shielding
- Anyone looking to enhance the visual ambiance of a fire pit table with a reflective glass element around the flame zone
Important Information
- Measure your fire pit table’s interior ledge width and depth before ordering. This wind screen is 36 in. wide × 14 in. deep × 7.7 in. tall. Confirm it fits within your fire pit’s interior ledge before purchasing.
- This wind screen is designed for use with propane gas fire pit tables. Do not use with wood-burning fire pits or open fire bowls where ember and ash contact with the glass is likely.
- Allow the glass panel to cool completely before handling or cleaning after fire pit use. Tempered glass is heat-resistant, but handling hot glass surfaces risks burns and thermal shock from rapid temperature change (e.g., cold water on hot glass).
- Inspect the glass panel for chips, cracks, or edge damage before each use. Do not use a damaged glass panel — thermal stress from the fire pit flame can cause a pre-damaged panel to fracture unexpectedly.
- Clean with a damp cloth or glass cleaner. Do not use abrasive cleaners or scourers. Do not apply cold water to a hot panel.
- Handle the glass panel carefully during installation and removal. Even with polished edges, tempered glass panels should be handled with care to avoid dropping or impact against hard surfaces.
Frequently Asked Questions
Will this wind screen fit my fire pit table?
This wind screen is 36 inches wide, 14 inches deep, and 7.7 inches tall. It is designed to sit within the interior ledge of most rectangular propane fire pit tables. Measure your fire pit’s interior ledge width and depth before ordering to confirm fit. If your fire pit ledge dimensions differ significantly, this wind screen may not install correctly.
Why is tempered glass used instead of regular glass or acrylic?
Tempered glass is four to five times stronger than standard glass and fractures into small blunt granules rather than large sharp shards when broken — a critical safety distinction for a panel installed next to an open flame. Acrylic melts and deforms at temperatures well below what a fire pit flame produces and is not suitable for this application. Tempered glass is the only appropriate material for a fire pit wind screen.
Does the clear glass block the view of the flame?
No. Clear tempered glass provides wind protection while maintaining a fully unobstructed view of the flame from all seating positions around the fire pit table. The glass also reflects firelight, enhancing the visual ambiance around the flame rather than diminishing it.
How is the wind screen attached to the fire pit table?
The included stainless steel attachment clips secure the glass panel to the ledge or rim of the fire pit table. Install the clips per the included instructions and confirm the panel is fully seated and stable before operating the fire pit.
Can I use this with a wood-burning fire pit?
No. This wind screen is designed for propane gas fire pit tables only. Wood-burning fire pits produce embers, ash, and irregular heat that can cause thermal shock or damage to the glass panel. Do not use with wood-burning fire pits or open fire bowls.
How do I clean the glass panel?
Wipe with a damp cloth after use to remove light soot film. For heavier residue, use a glass cleaner appropriate for tempered glass. Do not use abrasive cleaners or scourers. Allow the panel to cool completely before cleaning — never apply cold water to a hot glass panel, as this can cause thermal shock.
If wind is affecting your propane fire pit’s flame stability and you want protection that doesn’t block the fire view, the Westwood 36-inch tempered glass wind screen delivers wind shielding, flame reflection, and a polished aesthetic — all with stainless steel clips and a 1-year warranty. Confirm your fire pit’s interior ledge dimensions before ordering. Order today.
